How to Clean and Reuse Triple Flange Eartips

Quick answer

Clean Etymotic Triple Flange Eartips by gently washing with mild soap and warm water, then air-dry completely before reuse. Avoid harsh chemicals or scrubbing that can damage the silicone.

Steps to clean and reuse triple flange eartips

1. Remove eartips from earphones: Grip the base of the eartip and gently pull it off the earphone nozzle. Avoid pulling on the flanges to prevent tearing. Checkpoint: If the eartip feels stuck, twist it slightly while pulling to release the grip.
2. Wash with mild soap and warm water: Use a small amount of gentle hand soap or dish soap. Rub the eartip between your fingers for 20-30 seconds, focusing on the flanges and stem. Rinse thoroughly with warm water. Common mistake: Do not use alcohol, hydrogen peroxide, or bleach—these can dry out the silicone and cause cracking.
3. Air-dry completely before reuse: Place the eartips on a clean towel or drying rack in a well-ventilated area. Allow them to dry for at least 1-2 hours. Ensure no moisture remains inside the stem or between flanges. Checkpoint: Never use a hair dryer or direct heat to speed up drying—it can warp the silicone.
4. Reattach and perform a seal check: Push the dry eartip firmly onto the earphone nozzle until it is seated securely. Insert the earphone and check for a proper seal by gently tugging—if it stays in place, the seal is good. Common mistake: If the eartip feels loose or the seal is weak, the silicone may have stretched from age—replace with a fresh eartip from your 10-pack.

Product facts

• Triple Flange Eartips - Long Stem | 10 Pack: Etymotic Triple Flange Eartips are replacement eartips offered in a 10 pack, available with long stem and large fit options. Having a multi-pack means you can rotate clean eartips while others dry, and the long stem option provides deeper insertion for better noise isolation.