What the MMCX to 2.5mm Balanced Cable Does
The Etymotic MMCX to 2.5mm Balanced Audio Cable is a cable upgrade for the entire Etymotic ER Earphone Series. It uses an MMCX connector with a special "key" that helps lock the cable in place and protects the integrity of the connector. This cable may also be used with many other earphones that have MMCX connectors.
Moving to a balanced cable means each side of the earphone pair gets a discrete signal from the player or headphone amplifier you are using. This setup is common in high-resolution portable audio systems.
Cable Details at a Glance
- MMCX to 2.5mm Balanced Audio Cable 60" | Black | ER Series: The black 2.5mm balanced cable is a cable upgrade for the entire Etymotic ER Earphone Series that utilizes an MMCX connector with a special "key" that helps lock the cable in place and protects the integrity of the connector. The keyed MMCX connector ensures a secure fit that reduces accidental disconnection and wear on the connector over time.

MMCX to 2.5mm Balanced Audio Cable 60" | Black | ER Series - MMCX to 2.5mm Balanced Audio Cable 60" | Black | ER Series: This cable may also be used with many other earphones that have MMCX connectors. If you have multiple MMCX earphones, this cable can serve as a balanced upgrade across different models, not just Etymotic ER series.
- MMCX to 2.5mm Balanced Audio Cable 60" | Black | ER Series: Please note that you will need a special Digital Audio Player or headphone amp that supports the 2.5mm balanced protocol in order to take full advantage of the Etymotic balanced cable. Without a balanced source, the cable will not deliver the intended discrete signal benefit. Check your player or amp for a 2.5mm balanced output before purchasing.
Setting Up the Cable with Your ER Series Earphones
Follow these steps to connect the cable to your earphones. The keyed MMCX connector helps ensure a secure fit.
- Check compatibility: Confirm your earphones have an MMCX connector. The cable is designed for the Etymotic ER series with MMCX, but also works with many other MMCX earphones.
- Align the connector key: The MMCX connector has a small key (a flat edge) that aligns with a corresponding notch on the earphone. Insert the connector so the key lines up.
- Insert and lock: Gently push the connector straight into the earphone until it clicks. The key helps lock it in place and protects the connector integrity.
- Connect to a balanced source: Plug the 2.5mm plug into a Digital Audio Player or headphone amp that supports the 2.5mm balanced protocol. Without this, you won't get the discrete signal benefit.
- Test the audio: Play a track and verify that both channels are working. If you hear only one side, check the connection and source settings.
What to Know About Balanced Audio
Balanced audio sends separate left and right signals to each earphone, which can reduce crosstalk and noise in the signal path. The 2.5mm balanced cable is one of the common connector types for portable balanced setups.
The supplied information does not specify whether the cable will sound better than a standard cable. Audible improvements depend on your source equipment, earphones, and listening environment. The main benefit is the discrete signal path, not a guaranteed change in sound quality.


